Should I install a wind turbine?

Are you considering installing a wind turbine?

Need to know how to remotely measure wind speed?

Looking for a remote wind speed data logger?

Do you want to know if your site is going to be windy enough?

Would you like to monitor wind speed and direction before buying a wind turbine?

If the answer to any of the questions above is "YES" then we can help

We are VERY PLEASED to announce the arrival of the product that everyone (residential and commercial) have been after. The NEW Power Predictor from Better Generation makes analysis of viability of a WIND TURBINE (or Solar Turbine). Power Predictor WIND SPEED data logger is available today

Wind Speed data logging kit with POWER analysis- £179

Wind Speed and Direction kit POWER PREDICTOR - only £179

Option 2) Kestrel 4000 series - for short term (24 hour to 7 days) wind speed data logging we recommend the Kestrel 4000 series to remotely monitor wind speed at your site, before purchasing a wind turbine. Please refer to details below, then click relevant links within text.

Kestrel 4000 with wind vane

Kestrel 4000 anemometer or Kestrel 4500 anemometer (with wind DIRECTION) mounted to a Kestrel Wind Vane. This unit is left installed on a pole, working as a remote data logger. After a week or so you can retrieve the Kestrel anemometer and download the data in TEXT format for review and manipulation in a spreadsheet package.

The Kestrel 4000 series anemometers will store 2000 data samples. The user can pre-set the sample rate. A good example would be a 10 minute sample rate - which willprovide well over 1 weeks wind data at a reasonably high sample rate.

Batteries - please note. This is a total remote solution that requires NO MAINS POWER. The Kestrel 4000 series works on CR2032 batteries x 1 and AAA batteries x 2. The average battery life is approx 300 - 400 hours, that's approximately 12 - 16 days of data collection. We advise recovering the unit once per week and changing the batteries on each recovery. Rechargeable batteries may be used, but the life span of these is quite variable, so the customer would have to test this themselves.....

An example of data collection from a Kestrel 4000 series anemometer